Introducing the Hobbywing Justock XR10 G3 brushless speed control.

Legal Speed Control for the BRCA 17.5 and FWD Nationals for 2024.

Built-in polarity protection

One danger that all electrical systems face is a reversed polarity from the power source. This can be caused by a short circuit, or usually, incidentally reversing the terminals. The XR10 Justock is integrated using MOSFET. If the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system.

Built-in capacitor module

The built-in capacitor module eliminates the need for external capacitors and unwanted space.

RPM speed limit function

The ESC is able to support up to 6 different speed (RPM) selections to meet the needs and demands of various competitions in the world. It can be programmed through using the latest OTA Bluetooth module or the traditional 3in1 program box.

Zero timing competition design

The internal timing of the ESC is fixed at 0 degrees and cannot be adjusted. It is specifically built for zero timing races around the world.

Built-in BEC supporting high-voltage steering gear

The ESC has a built-in BEC which can support a maximum output current of up to 8A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market.

User-friendly and convenient for set-up

The ease of having a dedicated programming port eliminates the trouble of plugging and unplugging the cable to the receiver. In addition, the interface can power additional fans to further dissipate heat. The user-friendly interface allows for easy and convenient setup by simply connecting the 3in1 LCD programming box or OTA Bluetooth module to the dedicated programming port.

Protection functions

The various protection functions have greatly improved the reliability and durability of the ESC.

Single programming and RESET design button

The ESC is designed with a single built-in SET button. Calibrating or doing a factory-reset can be achieved by using this SET button. Simple and easy to use.

Support bi-directional motor movement

The ESC supports both CCW (counterclockwise) and CW (clockwise) motor rotational directions for different usage on the market.

Support ESC firmware upgrade

Hobbywing engineers are constantly innovating and pushing the limits of its products. Enjoy the latest functions by upgrading to the latest firmware. Simply connect the ESC using either the HW LINK App via the OTA Bluetooth module or the USB LINK software through the computer.

From Mon-tech racing is this impressive looking 1/10th FWD body.

The body features an aggressive look and a very high level of detail with an adjustable rear wing that can be attached in a low, mid or high position, allowing to fine-tune the aerodynamic performance of the body. The body was designed using the latest 3D software for accuracy and it is produced in Italy using high-quality Lexan polycarbonate. 

Supplied clear and includes a detailed decal sheet with headlights and grill stickers, window masks and wing mounting hardware.

Introducing from Ride their belted Frontie Tyres.

Cool looking tyre with improved performance for this growing class.

The pre-glued Ride 24mm Belted Tyres are ready to use directly out of the packet. The tyres feature an inner belt which prevents them from expanding in diameter after using additive or tyre warmers. The tyre diameter will remain consistent. Beautiful silver spoke wheels for that extra sharp look on the track.

The Ride Belted 24mm tyres are the tyres of choice for the ETS FWD class, as they deliver a great look and a strong performance for this growing racing class.

BRCA Approved for 2021 Clubmans.

RI-MB-BRCA - RIDE BRCA FWD BELTED CUT SLICK TYRES - 6 SPOKE WHEELS - WHITE - 4PCS

FOR BRCA 1/10th ELECTRIC FRONT WHEEL DRIVE & TOURING CAR 2024

- The main feature of these motors is the fixed timing and easy to use solder joints, making it an excellent motor for controlled classes.

- Also available in winds 10.5T to 25.5T

Features

- The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability.
- The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
- The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.
- The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.
- This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.
- This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice.
- The motor design is in compliance with IFMAR, and ROAR specifications.