Block link
New products
-
Hobbywing XERUN XR10...
£32.00 £44.99ONE ONLY AT THIS PRICE.
Specification:
Cont./Peak Current - 60A/380A
Motor Limit - Sensored / Sensorless Brushless Motor
Applications - 1/10, 1/12 on-road & off-road CLUB competition and normal training
(Motor) KV Limit - Brushless Motor Limit 2S LiPo/4-6S NiMH: 8.5T (1/10 on-road), 11.5T (1/10 off-road)
Brushless Motor Limit 3S LiPo/8-9S NiMH:13.5T (1/10 on-road), 17.5T (1/10 off-road) .LiPo/NiMH Cells - 2-3S LiPo/4-9S NiMH
BEC Output - 6V, 2A (Line-mode BEC)
Fan (Included) - Powered by the stable BEC output voltage of 6V
Connectors - Input End: No, Output End: No.
Size/Weight (mm/g) - 33.5mm(L) x 28.5mm(W) x 30.5mm(H) / 59.8g
-
MYLAPS RC4 TRANSPONDER
£78.00 £98.00Features:
- All your results in your personal profile.
- RC4 transponders can be used for both indoor and outdoor racing and will perform on just about any surface.
- Compatible with MYLAPS RC4 timing systems.
-
-
LRP DUCT FOR 30MM FAN
£14.99LRP Conveyor Ducts with integrated Venturi duct direct the airflow directly to the motor to further improve cooling. For 30mm fan LRP501837
-
LRP DUCT FOR 40MM FAN
£14.99LRP Conveyor Ducts with integrated Venturi duct direct the airflow directly to the motor to further improve cooling. For 40mm fan LRP501837
-
MR33 ALUMINIUM MOON...
£25.99MR33 Moon Style High Speed Aluminium Fan for the perfect motor cooling.
The fan has a rounded top aluminium housing for a very long life and a very cool look.
In addition, the fan has a high speed for the perfect cooling of your motor!
Cable length (to plug): 165mm
The MR33 Moon Style fans are available in 30mm and 40mm versions.
MR33-AMCF-30 MR33 Aluminum Moon Style High Speed Fan 30mm
MR33-AMCF-40 MR33 Aluminum Moon Style High Speed Fan 40mm -
AEROX ELITE LIPO...
£70.99With a new venture into Electronics, Aerox has sourced some of the highest performing LiPo batteries in the world.
The range includes a wide variety of battery specs for 1/12th On Road, 1/10th On and Off Road. All supplied in a hard case with 5mm plugs and awesome Aerox styling. The batteries have been selected for High C rating and low internal resistance which makes them especially good for Stock Racing but equally at home with the high power demands of Modified Racing.
Specifications
Capacity: 6300mAh
Nominal Voltage: 7.6V
Discharge C Rate: 150C
Max Charge C Rate: 3C
Dimension:(L*W*H)139*47*23 mm
Connector: 5mm bullet
Weight: 278g
47.9Wh
Suitable for: Touring Car Stock and Modified.
BRCA and EFRA Legal from April 1st. -
RUSH PRE-GLUED TYRES...
£27.99New from Rush for the 2024 outdoor tarmac season.
Developed for UK tracks and weather conditions, with a new wheel for 2024 to improve concentricity, while maintaining traction and durability.
BRCA 1/10th Nationals control tyre 2024.
Medium moulded insert. 2024 version identified with sticker on wheel.
Stitched and glued belts for extra durability on long, fast UK type tracks.
Same tyre and insert as successfully used in 2023 season. -
MUGEN SEIKI MSB1...
£459.99The initial supplies will be in Very short supply, so please place your order to make sure that you are on the list for the first batch.
-
-
-
INFINITY FUEL TANK
£27.99INFINITY FUEL TANK.
Use with Project Rc Radio Tray for Mugen MRX6X (R).
Allows the rc battery to be fitted below for much lower centre of gravity.Improves handling no end.
-
PROJECT RC MRX6X RADIO...
£102.99Allows the use of an INFINITY Fuel Tank to be fitted. This then allows the rc battery to be mounted underneath the tank.
Much improving the Centre of Gravity.
Battery can be used with centre weights if required. -
-
-
-
HUDY 5MM ALLEN WRENCH
£9.00 £11.99SALE - ONE ONLY
5mm Allen Wrench x 120mm Length
(Bottom box in photo) -
HUDY 4MM ALLEN WRENCH
£9.00 £11.99SALE - ONE ONLY
4mm Allen Wrench x 120mm Length
(Middle box in photo) -
-
TORO TS 120A ALLOY ESC...
£92.99 £122.99ONE LEFT AT THIS PRICE
SKY-RC Toro TS 120A ESC for 1/10th Scale Car is designed for the use with 2S to 3S LiPo battery packs, has a 3.5T motor limit with 2S lipo.
The specially designed alloy case keeps it super cool.BRCA Legal.
Specifications
Weight
45g (w/o wire)Constant/Burst Current
120A/760A
Motor Compatible
Brushless Sensor & Sensorless
Car Compatible
1/10 and 1/12 Buggy and Truck
1/10 and 1/8 CrawlersMotor Limits
5-6S NIMH or 2S LIPO--=3.5T(1/10 Buggy), =5.5T(1/10 Truck)
8-9S NIMH or 3S LIPO--=5.5T(1/10 Buggy),=8.5T(1/10 Truck)
Resistance
0.0003ohmBattery Cell Count
4-9S NIMH or 2-3S LIPOBEC Output
6V@3A, linearFAN
5V@0.2A , MAX 12.6V -
PG MUFFLER GLOVE...
£15.99P-Line Muffler Glove 400ml is a special protective grease resistant to high temperatures (-35°C +270°C).
Apply it by generously, spraying directly on to the exhaust and manifold, (for a better result we recommend applying two layers of release agent).
After use, all rubber residues will be easily removable with a simple cloth and without any effort.
One application lasts for more than 12 hours.
-
-
-
-
-
-
-
-
-
-
HASI TUNED R7 - AAC On...
£653.99The engines are totally new and are different from the previous version in the following details:
- New high dissipation and low density aluminium cooling head, to combine functionality and lightweight;
- New crankshaft, with revised timing and balancing;
- New piston and liner
7 PORTS AAC* with high compression piston made from rod; *(Aluminium Piston, Aluminium Liner, Chrome Plated Liner)
- New reinforced conrod;
Each engine will have its own dedicated sleeve, which will be perfectly honed inside the crankcase, avoiding dangerous vibrations; the design of the ports has been revised to combine performance and reliability.
Like every Hasi engine, they are numbered one by one and accompanied by a certificate of guarantee and authenticity and the useful engine book.
Also available to order 'Part Run-In'.Also available in 9 port at same price - to order.
Special Introductory offer on all AACR7 ordered before December 30th 2023. Offer ends today!Offer applies to UK customers only!
-
-
OFC-2814-T-L BALL STUD...
£7.495mm Thread Length
These parts replace the original ones by MUGEN(#A2814). 6mm Ball
-
OFC-2814-T-XL BALL...
£7.995mm Thread Length
These parts replace the original ones by MUGEN(#A2814). 6mm Ball
-