Imax B6 Mini Charger 6A 60W DC -Compact size -Terminal voltage control -Re-Peak mode for NiMH/NiCd Battery -Battery meter -Battery internal resistance tester -PC Communications: USB Port for PC Control & Firmware Upgrade -Smart phone control and monitor via Wifi module (SK-600075 Optional Part)

SkyRC D260 is a dual channel AC/DC charger, which features an intuitive interface, and its button design makes it incredibly easy to operate. With two independent circuits and the ability to charge batteries up to 6S at maximum 14A per channel, D260 is a smart choice for RC hobbyists.

ONE LEFT AT THIS PRICE

SKY-RC Toro TS 120A ESC for 1/10th Scale Car is designed for the use with 2S to 3S LiPo battery packs, has a 3.5T motor limit with 2S lipo.
The specially designed alloy case keeps it super cool.

BRCA Legal.

Specifications

Weight
45g (w/o wire)

Constant/Burst Current
120A/760A

Motor Compatible
Brushless Sensor & Sensorless

Car Compatible
1/10 and 1/12 Buggy and Truck
1/10 and 1/8 Crawlers

Motor Limits
5-6S NIMH or 2S LIPO--=3.5T(1/10 Buggy), =5.5T(1/10 Truck)
8-9S NIMH or 3S LIPO--=5.5T(1/10 Buggy),=8.5T(1/10 Truck)

Resistance
0.0003ohm

Battery Cell Count
4-9S NIMH or 2-3S LIPO

BEC Output
6V@3A, linear

FAN
5V@0.2A , MAX 12.6V

This is a non-contact infrared thermometer specifically designed for use with R/C engines, electronic speed controllers, motors, battery packs, and battery chargers etc. Simply aim the infrared thermometer at the target and press the measurement button to quickly and easily display the surface temperature! 

-High accuracy and high speed infrared sensor 
-Four modes for temperature records: Quick Mode / Scan Mode / Max. Value / Min. Value 
-Celsius and Fahrenheit scale selectable 
-Testing a wide range of temperature from -40°C(-40°F) to 380°C(716°F) 
-The infrared emissivity coefficient can be adjusted 
-A large LCD can display temperature, emissivity coefficient and battery’s capacity, etc., and applied with back light, which -make it easy to operate and read 
-Low power consumption and powered by 2 x AAA batteries (Battery Excluded) 
-1 minute auto-off timer to save battery’s life

Ideal for Brushless Motors and speedos as well a Nitro Motor use.

SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.

A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.
The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape.
(Two kinds of bottom covers are included, user can change the bottom cover.)

The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and conditions of your battery pack.

From SKY RC are these upgraded tyre warmers for 1/10th Touring, with improved silicone cups.

The latest Tyre Warmer with the silicone warming cup makes heating more even, gives better heat preservation. Preheating the rubber tyre surface increases the rubber's friction coefficient and enhances its grip on the track surface. Racing for RC hobbyists is made easy! Sky RC Tyre Warmers will definitely give you the advantage of tyre-readiness whenever you roll out onto the track.

DC Jack
On the left side of the Tyre Warmer is a jack for the DC connection. To achieve the optimum warm-up effect, the DC power must continuously provide 12V voltage with a current of 8A.

XT60 Connector
On the right side of the tyre warmer is the generic built-in XT60 connector, which allows powering the tyre warmer with a 4S LiPo battery pack. No adaptors are necessary.

Special Features
1.Dual Power Source: 4S LiPo battery pack and 12-18V DC input.
2.Front & Rear temperature can be set independently
3.Temperature of 4 tires is controlled by MCU
4.Removable front & rear tire warmers
5.Eight different beep tones
6.Minimum temperature
7.Celsius - Fahrenheit selectable display
8.Four LED indicators
9.Safety timer

Intuitive User Interface

Large LCD Display Screen

Four LED indicators

Includes tyre warmer unit, 2 pairs of silicone cups, DC input cable with crocodile clips and instructions.

The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and 
NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes 
based on ambient temperature. 

SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a 
minimal of stress and wear on the engine. It help relieve the stress on the crank, 
con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth 
engine start, with no stress on your starterbox. Fuel consumption is much less, as 
you do not have to spend time warming up and adjusting your engine. A pre-heatet 
glow-plug will increase the life of your plug. It is also perfect for break-in, as it 
reduces the "pinch" on your new engine. You will experience that engine pre-heating 
is a must. Most importantly, it will quickly pay for itself by increasing engine life and 
performance! 

Features:

MCU control heating time and heating power for maximum safety. 
Safety timer: turn off power around 10 minutes automatically. 
Built-in temperature sensor: to control the output power of the heater. 
LED indicator for status of engine heater. 
12V DC source with low voltage cutoff. 
Fireproof and heat resistant adjustable cover. 
Fits all .19-.26 RC nitro engines. 
Very small, lightweight and compact for quick and easy storage. 
It's designed to transfer heat effectively and efficiently. 
Access port on top allows you to start and monitor your engines temperatures 
without having to take the heater off.

NEW - SKY RC Pro car stand in great looking black aluminium with silver detailing for On Road cars.

Lightweight with various additional functions including shock re-build holes.

Non-slip rubber feet.

Non-slip rubber strips.

Introducing the SKY RC BD250 Discharger.

Giving up to 250W / 35A of discharging power in a stand alone unit.