Introducing our 3D Pro Carbon Ultra-Lite Anti-Tuck Stiffener Set for Horizontal Rear Post Body Mounts Pro

How good is hard close racing... until you get a body tuck. Make body tucks a thing of the past with our new ultra lightweight, durable solution! 

These rear fender stiffeners combine very thin carbon rods with the latest 3D Printing technology to provide a feather weight of only 1.2g each! The best part... they attach directly to our Horizontal Rear Post Body Mounts Pro! Simply screw them in underneath into the spare hole in the HRP Pro, align with your body, drill a small hole and screw it in!

These are particularly handy these days with lighter bodies, and bodies being mounted further forward which leaves such a small amount of material behind the rear wheel arch. This material is often very flexible and can very easily get tucked up under the rear wheel. 

The plastic parts are printed at a very high resolution and with some of the highest quality filaments on the market to make them fit for the task. They filament provides great ductility and strength when printed on our industrial grade printers.

The stiffener set comes pre-assembled and includes all mounting hardware for installation. The supplied M3x5 Alloy screws are great to keep the weight down and attach the Anti-tuck to behind the rear wheel arch.

They work with all Zoo Racing Bodies, as well as Xtreme Twisters and Brutale (Not Mach 1), Blitz and the new Protoform P63.

They can be used ONLY Horizontal Rear Post Body Mounts Pro.

Installation instructions attached in photos

Features:

• Ultra lightweight at only 1.2g each side 
• Seamlessly integrates with our Horizontal Rear Post Body Mounts Pro
• Significantly increased stiffness of the lexan behind the rear wheel arch to prevent body tucks
• Fits all popular bodies on the market
• High quality 3D Printed parts with Carbon Fibre rod construction
• Pre-assembled and includes all required hardware for fitment
• Tested for both performance and durability by our team drivers

We're excited to release the first of our eco friendly solution for rubber tires!

Traditionally chemicals such as brake cleaner and nasty petroleum based solutions have been used to clean and additive tires. This is harmful to the environment and most importantly to the human body. Throughout our 15+ years of racing, we have seen more health issues from the use of these dangerous chemicals than we care to admit. These health issues can be caused by inhalation of the chemicals, or physical skin exposure which is then absorbed into the blood stream.

This was our motivation to develop a range of tire cleaners and additives that are safe to use, not harming your body, or the environment. The first of which... Dominate!

We are quite aware that most racers won't sacrifice lap-times for the sake of their health, and thats why we have conducted extensive testing to ensure that Dominate out performs every other cleaner on the market! Not only is it safe to use, it's also fast!

Our Dominate Tire Cleaner has been developed by a dedicated local Australian Racer over the past 12+ months. Developed with the aid of several top drivers and certified chemists, we were able to discover an environmentally friendly non-toxic way of softening and conditioning rubber without drying it out, like you've never seen before! Opening up the pores of the rubber is crucial to the absorption of the tire additive and thus its effectiveness of creating more traction and reducing "drop off" over a run.

Dominate is supplied in a pump spray bottle for easy application on both on-road and off-road rubber tires. Simply spray onto a rag or towel and firmly wipe the tire with the cleaner. Allow to sit for at least 30 seconds until sticky, before applying the tire additive. Dominate's cleaning capability can be even further increased when tires are cleaned at higher RPM on a tire sander.

Dominate can be used with both new and old tires, and provides a brilliant base for maximum absorption end effectiveness of the tire additive.

If you run out - just grab a Dominate Refill pouch here! Save the environment and your pocket.

Try some today - Help your body, the environment and your lap-times!

Features:

• Environmentally Friendly - Biodegradable and non-toxic
• Much safer for daily use on the body
• Fresh eucalyptus "green" odour
• Softens and restores rubber tires, without drying them out
• Extremely effective on Rubber tires in On-road & Drag, as well as Off-road
• Improves absorption of additives and compounds added to the tire after cleaning
• Comes in a blacked out 100mL spray bottle with cap
• MSDS Available

Horizontal Rear Post Body Mounting Set BY RC MAKER

Xteme and Zoo Bodies...MUGEN MTC2 and AWSOMATIX

Extensions for our brand new Horizontal Rear Post Body Mount Pro!.  Suitable for XTREME BODIES

These carbon fibre extensions attach to to our HRP Pro Mounts. They require the mounts for installation and are useless without the mounts. The mounts suit all cars and most bodies, all you need to do is select below which carbon extensions you would like to use with the mounts!

This includes 1 pair of extensions which will work for 1 body.

Simply choose the correct extensions for your car and body, and add to cart. If you wish to buy extensions for different bodies, just add the Xtreme ones to cart, come back and then add the Zoo ones to your cart. 

Long (100-102mm post width): 39-48mm 

Suits Mugen MTC2 and Awsomatix

Extensions for our brand new Horizontal Rear Post Body Mount Pro!.  Suitable for ZOO BODIES

These carbon fibre extensions attach to to our HRP Pro Mounts. They require the mounts for installation and are useless without the mounts. The mounts suit all cars and most bodies, all you need to do is select below which carbon extensions you would like to use with the mounts!

This includes 1 pair of extensions which will work for 1 body.

Simply choose the correct extensions for your car and body, and add to cart. If you wish to buy extensions for different bodies, just add the Xtreme ones to cart, come back and then add the Zoo ones to your cart. 

Long (100-102mm post width): 39-48mm 

Suits Mugen MTC2 and Awsomatix

HORIZONTAL REAR POST BODY MOUNT PRO - 7075 ALU MOUNTS ONLY W/SCREWS

These are the MOUNTS ONLY - you must also buy the HRP Pro Carbon Extensions as well as these mounts, Available HERE

We are really excited to present our new Ultra Lightweight (6.5g/pair) revolutionary Body Mounting System for use with Horizontal Rear Body Posts!

Our original HRP Lite system has taken the world by storm, with thousands of racers opting to mount their bodies the better way! After months of feedback from drivers around the world as well as our team drivers consisting of the likes of Marc Rheinard, Yannic Prumper, Akio Sobue and Nicholas Lee, we set out to further improve on what was already a great product. 

Introducing our Brand New 7075 Black Anodized Wing Buttons for 1/10th Touring Car!

These specially shaped wing buttons are profiled identically to our super popular Horizontal Rear Post Body mounts! This provides maximum surface area to increase the stability and rigidity of the entire system, whilst keeping your wing sitting flat.

Coming in at under a gram each, they are a great way to fix your wing and get the most out of your Horizontal Rear Post Body Mount System. But no matter how you mount your body, these Wing Buttons are a must have on your touring car! 

Machined on Swiss Grade CNC Milling Machines from U.S 7075 Alloy, they feature black anodizing with a tiny silver chamfer and laser engraved RC MAKER logo.